LED Lightbar With For Police Fire Emergency Ambulance Airforce And Special Vehicles

LTF-A921AB LED Lightbar with for Police ,Fire,Emergency Ambulance,airforce and Special Vehicles

1. Summary

This LED Lightbar adopts double-layer aluminum alloy boards structure and sector design, which has distinct outline stronger percussion-resistant capability, and is not easy to lose color and get aged. Moreover, the LED light bar has good sealing and waterproof. A lot of LED lights are distributed as a ring and use high power LED lights let it give out strong flash from each direction. And it has advantage with high brightness and low power waste.

The LED light bar has 15 modes function offer to choose, and have power cutoff memory function. It has a 100W speaker inside; it can be installed on all kinds of special vehicles. Even in extremely complicated, circumstances, it can transmit emergency signal correctly.

2. Features
1). 100,000 hour life span
2). Weather-proof housing
3). Generation III/ll LEDs
4). Powered by 12V/24V
5). Perfect for police fire EMS and construction vehicle lighting and airforce .

3. Specifiation

Work voltage	DC12V/DC24V
The max. lightened bound	> 800LX
Environment	-40 ℃~ +50 ℃
Waste currant	Total lights≤ 8A, Speaker≤ 7A
Speaker power	100W
Total power	200W
Left and right alley light	7.2W*2 white LED
Direction lights	3.6W*6 amber LED
Main flash lights	3.6W*6 red LED, 7.2W*6 blue LED
Dome	Imported high-strength PC material with excellent lustrous and high penetrating-for ability
Base	Aluminum alloy material with high strength
Function	Multi-flash patterns and 7 sounds siren
Color	Red/Blue/Amber/Clear
Size	1200/1400x300x130(45)mm
Net Weight	18/20Kgs

 

4.Packing Information:

Packing Size	1490/1235x350x180mm
Qty/CTN	1PCS

 

5. Flash mode

Flash Mode	Remark
1	¤ ¤ ● ● ¤ ¤ ● ●	Double
2	¤ ¤ ● ● ¤ ¤ ● ●	Quad
3	¤ ¤ ● ● ¤ ¤ ● ●	Quint
4	¤ ¤ ● ● ¤ ¤ ● ●	Mega
5	¤ ¤ ● ● ¤ ¤ ● ●	Ultra
6	¤ ¤ ● ● ¤ ¤ ● ●	Single-Quad
7	¤ ¤ ● ● ¤ ¤ ● ●	Single H/L
8	●←●←●←¤ ¤→●→●→●	Turn aside
9	● ¤ ● ¤ ● ¤ ● ¤	Quad(separate)
10	● ● ● ● ¤ ● ● ● 8 6 4 2 1 3 5 7	Jump
11	● ● ● ● ¤ ¤ ¤ ¤	Relay
12	¤ ¤ ¤ ¤ ¤ ¤ ¤ ¤	Speedup(all)
13	●←●←●←●← ●←●←●←¤	Turn left
14	¤→●→●→● ●→●→●→●	Turn right
15	¤ ¤ ¤ ¤ ● ● ● ●	Speedup(split)

a) Put light bar on the vehicle's roof, base on the vehicle's size, adjusting the frame to fit it, And Then let the catches button the rainwater line on both side of the vehicle and screwing the nut by wrench. (see. Figure 1 below)
                                 Figure 1. INSTALLATION OF THE LED LIGHT BAR

b) After installed, the four main red and black wires connect to the battery (two red to +, two black to -).

c) Inset the nine wires plug to the controller, and the another four wires plug inset to the siren. Then after checking, operate the controller and siren to work the light bar. (See. Fig. 2)

                              Figure 2. WIRING

7.Controller
Switch LEFT ALLEY control the left alley light, Switch RIGHT ALLEY control the right alley light, Switch FLASHING LIGHTS control main flashing lights, switch FLASH MODE choose flash pattern for main flashing lights. Switch TRAFFIC ADV control traffic direction lights power supply, switch LEFT FORWARD RIGHT is choose three modes to direct traffic.

Note:

   If the light can not work, please check the main fuse inside the cigar plug.

Workshop:


Applications:
Police, Fire, The Automotive, Police, Fire, Motorcycle, Construction,Emergency Vehicle and School Bus Industries

Note: ¤flash, ●dark, ←turn left, →turn right

6.Installation of the warning light bar